|
| Test |
Method |
Typical
Results |
| Concentrate |
4:1
Dilution |
| Specific Gravity@60o
F(15.6o C) |
ASTM D-1298 |
1.0254 |
1.011 |
| API Gravity @60o
F(15.6o C) |
ASTM D-287 |
6.5 |
8.4 |
Viscosity @ 77o
F (25o C),
SFS (within 24 hours)* |
ASTM D-244 |
188 |
-- |
| Residue by Evaporation, %
wt. |
ASTM D-244 |
66 |
13 |
| Water by Distillation,% wt. |
ASTM D-244 |
32 |
86.4 |
| Sieve Test, % wt.
retained |
ASTM D-244 |
0 |
0 |
Viscosity, @40o
C,
cSt (within 24 hours)* |
ASTM D-445 |
532 |
1.05 |
| Flash Point, oF |
ASTM D-92 |
none |
none |
| Pour Point, oF(oC) |
ASTM D-97 |
43(6) |
37(3) |
| Emulsion Stability, ml cuff
after 1 month, 4:1 (80%/20%) dilution (water:concentrate) |
per Manufacturer |
-- |
<10 |
| Product Code |
|
5000 |
-- |
* Viscosities of this type of emulsion fluctuate with time,
therefore viscosities must be run within the specified time after original
manufacturing, or they will be different.
To aid you in determining the percentage of "solids" in a diluted
mixture of Pennzsuppress® D, below is a
chart indicating the approximate amounts of solid material based on different
dilution ratios:
DILUTION RATIO
Water: PennzSuppress®
D Concentrate |
SOLIDS
Weight % |
| 1:1 |
33 |
| 2:1 |
22 |
| 3:1 |
16.5 |
| 4:1 |
13 |
| 5:1 |
11 |
| 6:1 |
9.4 |
| 7:1 |
8.2 |
| 8:1 |
7.3 |
| 9:1 |
6.6 |
| 10:1 |
6 |
|
